bicycle electric motor kit for rear gear, 250W, 350W, 500W in 24V and 36V

bicycle electric motor kit for rear gear, 250W, 350W and 500W in 24V and 36V. WITHOUT BATTERY.

Parts List:

1) The full set of a good motor.

2) an electrical impulse

3) Hanger 1

4) battery pack, elastic bands (the battery box, fixed board) 1

5) Paul Silk limit 2.

6) tie 3

7) Bubble a group.

8) Power Sensor 1 Motor debugging steps: A: 1) Connect the wires for edge lines. Thick red line, with thick black line. 2) connected Hall to switch the line, there are three thin line 3), motor phase line 3 thick lines of red, yellow and blue. 4) The motor Hall line 5 thin line

B: Connect two yellow color selection phase C: 1) headlights of the thin red and thin black and controller of the power line thin red and thin black line corresponds well to pay attention to positive and negative electrodes. 2) Bars 2 line and the Hall switch to line two wire pairs inserted 3) brake the line 2 line and the controller's two wire pairs can be inserted.

D: the completion of A, or the completion of A. B, after. Open the power supply.

E: This is the motor rotation will be issued by stare pedal sounds. If you turn the opposite direction. Hand motor can rotate in the opposite direction. The direction of rotation and so meet the requirements.

F: Finally we must unplug B, yellow line of the election phase.

G. Operation is complete. Started. H: motor factory has been debugging a good time, you can separate the connection. But pay attention to make a record. Even wire will cause chaos controller. Light damage.

Product Details:

Part conversion kit

Model Number ZMN01-05

Motor Brushless

Range per Charge 35km

Voltage of Battery 24V,36v .48V

Watt 180~250w ,350W.450W.500W.1000W

Certification CE

Wheel Size 20" 24" 26" 28"

Max Speed 32km/h

bicycle electric motor kit for rear gear, 250W, 350W, 500W in 24V and 36V